Pureit Ultima Pro purifies water through a modern, 8-stage purification process that ensures water is Safer than boiled Water. It features an advanced Total Dissolved Solids (TDS) control technology to guarantee safe drinking water.

Stage 1: External Sediment Filter

Removes small and uneven dirt/impurities and extends the life of the carbon filter.

Stage 2: Pre-RO Carbon Filter

Removes chlorine and unrefined organic compounds such as harmful pesticides. It also absorbs bad taste and odor, which are caused by organic compounds present in water.

Stage 3: Mesh Filter

Removes remaining small and uneven dirt particles from the water.

Stage 4: Reverse Osmosis (RO) Membrane

Removes dissolved salts, hardness, pesticides, and heavy metals such as arsenic, lead, and mercury within permissible limits. It also eliminates microbial contaminants like bacteria, viruses, protozoa, and cysts.

Stage 5: Post Carbon Filter

Acts as a polisher and enhances the taste of the purified water.

Stage 6: Carbitrap

Further ensures the removal of ultra-fine particles.

Stage 7: Microfiltration Filter

Provides an additional purification stage by removing bacteria.

Stage 8: Dual UV-LED

Deactivates up to 99.99% of harmful, disease-causing bacteria and viruses to provide safe drinking water.

The storage capacity of Pureit Ultima Pro is up to 9 liters under Pureit test conditions, and it is fully automatic. When the water level drops, it automatically refills the storage tank.

Yes, Pureit Ultima Pro’s RO technology is capable of removing arsenic, fluoride, nitrate, and even iron up to certain limits.

To ensure your Pureit filter functions effectively, it’s important to monitor and replace the Germkill Kit (GKK) and Sediment Filter (SF) as needed. You can contact customer care, and a representative will visit your home to replace them.

The sediment filter needs to be changed/cleaned after every 2000 Litres. GKK-1 should be replaced after 4,000 liters of purified water usage under Pureit test conditions. GKK-2 should be replaced after 8,000 liters of purified water usage under Pureit test conditions. However, based on input water quality, the Litrage amount might vary from the standard values. However, if you notice a decrease in water flow or bad taste, earlier replacement is advised.

No, the water from the first cycle should be discarded. The same process should be followed after every filter replacement.

No, it is not recommended. If there is any issue, please call the Pureit helpline.

No, reject water should not be used for drinking or cooking. However, it can be used for watering plants or floor cleaning.

No, reject water should not be used for drinking or cooking. However, it can be used for watering plants or floor cleaning.

Contact the Pureit helpline.

Turn off the ball valve and call the helpline.

Stored water should be consumed within 2 days. If it is stored for longer, it should be discarded and the tank should be refilled with fresh water.

For any after-sales support related to your Pureit device, please call our Careline at 16627, available every day from 8:00 AM to 12:00 AM. Service time may vary based on the availability of spare parts and Germkill Kits (GKK).

Pureit Ultima RO+UV+MF purifies water through a modern, 7-stage purification process that ensures water is Safer than boiled Water. It features an advanced Total Dissolved Solids (TDS) control technology to guarantee safe drinking water. In the primary stages, the water passes through the Pre-Sediment Filter, Pre-RO Carbon Filter and Mesh Filter which removes coarse particulate impurities, dirt, chlorine, pesticides and other organic impurities. After which, the water flows through RO Membrane at high pressure where it removes TDS and heavy metals. The fifth stage is the high-intensity UV Chamber that inactivates harmful bacteria and viruses. After UV Chamber, the water passes through a TDS Modulator that adds natural minerals to the water, which then flows through a Post RO Carbon Filter that improves the taste and finally, the Micro-Filtration Membrane where water is purified third time!

Pureit Ultima RO+UV+MF has a storage tank capacity of 10 litres under Pureit test conditions with running input water in a power ON condition. With no continuous input water, the average dispense capacity is 9.2 litres. The process of filling the storage tank is fully automatic and when you take water out of the tank, the purification process automatically starts and refills the storage tank.

Pureit Ultima RO + UV + MF can purify water up to 28 litres per hour. However, the time taken to purify is influenced by the type of your water supply, the longevity of the device’s filters, the input water pressure, and other impurities present in the water. Pureit Ultima Mineral RO + UV + MF is also equipped with High-Water Saving feature that offers significant water saving of upto 45%.

You need to call the Pureit Helpline at 16627 and order the consumables. The Technician will visit your place and replace the consumable/Germkill Kit. There will be a delivery charge and you would need to buy the parts required.

You need to call the Pureit Helpline at 16627 and order the consumables. The Technician will visit your place and replace the consumable/Germkill Kit. There will be a delivery charge and you would need to buy the parts required.

If the input water has impurities normally not present in drinking water (high iron/ turbidity/ microbial contamination, etc.) or water is from an unknown source (river/lake/pond /borewell, etc.), then suitable pre-treatments may be required.

It is not recommended to open and service device by an individual. Call our Pureit Helpline at 16627 if you face any issue which requires servicing and opening the device.

There may be several reasons for this: While the Germkill Kits and the Pre-Sediment Filter have fixed replacement schedules, depending on your input water quality the Pre-Sediment Filter might need a replacement or cleaning even before the purifier gives you an alert. In such cases, please contact Pureit helpline on 16627 and get the Pre-Sediment Filter cleaned or replaced. The purifier will communicate the alert only if the purifier is in a switched on condition during the scheduled alert time. Post the completion of the scheduled alert time, Auto Shut off of water will be activated automatically for GKK, even if the purifier is in a switched off condition

While the Germkill Kits and the Pre-Sediment Filter have a fixed replacement schedule, you might be required to change the filters in the interim depending on the quality of your input water. Should the tap flow rate be very less or if it is taking too long for the tank to fill, then please contact the Pureit helpline at 16627 to change the membranes. These extra visits will be chargeable as per T&C.

No, the water from the first cycle should be discarded. The same process should be followed after every filter replacement.

You can use stored water for 2 days. If it is not used for more than 2 days we advice you to discard that water, follow guidelines mentioned in user manual for maintenance of purifier, refill and then consume.

For any after-sales support related to your Pureit device, please call our Careline at 16627, available every day from 8:00 AM to 12:00 AM. Service time may vary based on the availability of spare parts and Germkill Kits (GKK).

Pureit Vital Max purifies water through a modern, 7-stage purification process that ensures water is Safer than boiled Water. It features an advanced Total Dissolved Solids (TDS) control technology to guarantee safe drinking water. The water passes through pre-sediment filter that removes fine and coarse particulate impurities and improves the life of carbon filter, then pre-RO Carbon filter and Mini filters that removes chlorine and harmful pesticides along with finer particulate impurities. The RO membrane removes dissolved salts, hardness, pesticides, fluoride and heavy metals along with bacteria, virus and protozoa cysts. The UV Chamber stage provides additional purification to further inactivate bacteria, virus and parasites. And the post RO carbon filter acts as a polisher and enhances the taste of purified water and the final CarbiTrap stage helps in filtering water to further ensure removal of loose carbon particles.

The storage capacity of Pureit water purifiers differs as per the device’s specifications. Pureit Vital Max has a storage tank capacity of up to 7 Litres under Pureit test conditions while a continuous water supply. The process of filling the storage tank is fully automatic. When you take water out of the tank, the purification process automatically refills the storage tank.

Pureit Vital Max can purify water up to 24 litres per hour under Pureit test conditions, which is one of the highest among the leading RO purifiers. However, the time taken to purify is influenced by the type of your water supply, the longevity of the device’s filters, the input water pressure, and other impurities present in the water.

You need to call the Pureit Helpline at 16627 and order the consumables. The Technician will visit your place and replace the consumable/Germkill Kit. There will be a delivery charge and you would need to buy the parts required.

If the input water has impurities normally not present in drinking water (high iron/ turbidity/ microbial contamination, etc.) or water is from an unknown source (river/lake/pond /borewell, etc.), then suitable pre-treatments may be required.

It is not recommended to open and service device by an individual. Call our Pureit Helpline at 16627 if you face any issue which requires servicing and opening the device.

There may be several reasons for this: While the Germkill Kits and the Pre-Sediment Filter have fixed replacement schedules, depending on your input water quality the Pre-Sediment Filter might need a replacement or cleaning even before the purifier gives you an alert. In such cases, please contact Pureit helpline on 16627 and get the Pre-Sediment Filter cleaned or replaced. The purifier will communicate the alert only if the purifier is in a switched on condition during the scheduled alert time. Post the completion of the scheduled alert time, Auto Shut off of water will be activated automatically for GKK, even if the purifier is in a switched off condition

While the Germkill Kits and the Pre-Sediment Filter have a fixed replacement schedule, you might be required to change the filters in the interim depending on the quality of your input water. Should the tap flow rate be very less or if it is taking too long for the tank to fill, then please contact the Pureit helpline at 16627 to change the membranes. These extra visits will be chargeable as per T&C.

No, the water from the first cycle should be discarded. The same process should be followed after every filter replacement.

You can use stored water for 2 days. If it is not used for more than 2 days we advice you to discard that water, follow guidelines mentioned in user manual for maintenance of purifier, refill and then consume.

Like other ions, the RO technology can also remove arsenic, fluoride and nitrates. However, RO system is not recommended for arsenic level above 0.1 mg/L, fluoride level above 8.0 mg/L and iron level above 0.3 mg/L.

The sediment filter needs to be changed/cleaned after every 3000 Litres. GKK should be replaced after 6,000 liters of purified water usage under Pureit test conditions. However, based on input water quality, the Litrage amount might vary from the standard values. However, if you notice a decrease in water flow or bad taste, earlier replacement is advised.

It is not recommended to use the reject water for any kind of human/pets consumption (drinking or cooking). It may be used for gardening or cleaning floors.

Please call the Pureit helpline - 16627. Our technicians will visit your house and guide you on the repairs required. There will be a delivery charge and you would need to buy the parts required.

First switch off the Ball Valve if you find any leakage from the purifier and turn off the power switch. Check for any visual improper fitment and then call our Pureit Helpline number and register a service request.

Eco Recovery Technology in this water purifier provides effective purification with up to a 60% recovery rate, resulting in the high water saving for any RO. It can help you save up to 80 glasses of water every day! Pureit Vital Max is also compliant with the USEPA and provides 100% safe drinking water free of dangerous viruses, bacteria, heavy metals, and pesticides.

Pureit Vital Max is equipped with ‘Smartsense’ filter indicators which is a Digital Advance System that will warn you 15 days before the Germ Kill Kit expiry so that you know when it is time to change your filters. In case you do not replace it within 15 days, then the ‘Auto Shut Off’ feature stops the supply of water automatically. This technology offers you and your family 100% assurance of safety for your drinking water.

For any after-sales support related to your Pureit device, please call our Careline at 16627, available every day from 8:00 AM to 12:00 AM. Service time may vary based on the availability of spare parts and Germkill Kits (GKK).

It uses 7 stages of purification:

Stage 1:  i-Sediment Filter

Removes small and ultra-fine particles or sediments from the water and extends the filter’s lifespan.

Stage 2: Pre-RO Carbon Filter

Removes chlorine and harmful chemical substances such as pesticides. Also eliminates bad odor and impurities, including complex compounds often present in water.

Stage 3: Mesh Filter

Removes ultra-fine particles and dirt that may still be present in the water.

Stage 4: RO Membrane

Removes chlorine, bacteria, harmful chemicals, and dissolved solids such as TDS (Total Dissolved Solids), iron, aluminum, and heavy metals.

Stage 5: Post Carbon Filter

Acts as a polisher and improves the taste of purified water.

Stage 6: Micro Filtration Filter

Post-RO water goes through a microfiltration membrane that removes bacteria and viruses, ensuring even safer drinking water.

Stage 7: UV-LED

An ultraviolet light that guarantees completely safe drinking water. It eliminates 99.99% of viruses, bacteria, fungal spores, and other harmful microorganisms.

Pureit Marina comes with a 6-liter storage tank. The tank is fully microchip-controlled, and once you draw water from it, the system automatically starts the purification process again to refill the tank.

Pureit Marina can purify up to 20 liters of water per hour under Pureit test conditions. The purification speed depends on filter condition, inlet water pressure, TDS level, and the presence of various impurities in the water.

Yes. The RO filter technology used in Pureit Marina is capable of removing arsenic, fluoride, and nitrate effectively.

To ensure your Pureit filter functions effectively, it’s important to monitor and replace the Germkill Kit (GKK) and Sediment Filter (SF) as needed. You can contact customer care, and a representative will visit your home to replace them.

GKK should be replaced after 6,000 liters of purified water usage under Pureit test conditions and sediment filter will be included in GKK. However, based on input water quality, the Litrage amount might vary from the standard values. If you notice a decrease in water flow or bad taste, earlier replacement is advised.

No. You should only drain the first full chamber of water during installation or the first time the Germkill Kit (GKK) is replaced. This is necessary to ensure quality.

If the purifier is left open, dust and dirt from the environment may enter and accumulate in the chamber. It’s best to keep the purifier closed at all times and store it in a clean area.

If you experience issues like unusual taste or odor, first drain one full bucket of water from the chamber. If the issue persists, check the purifier for leaks or consider getting it cleaned by a technician.

The purifier can store up to 6 liters of water. If the water is not used within a day, it is recommended to discard it, refill the tank, and then use it to ensure freshness and safety.

For any after-sales support related to your Pureit device, please call our Careline at 16627, available every day from 8:00 AM to 12:00 AM. Service time may vary based on the availability of spare parts and Germkill Kits (GKK).

It uses 6 stages of purification:

Stage 1:  i-Sediment Filter

Removes small and ultra-fine particles or sediments from the water and extends the filter’s lifespan.

Stage 2: Pre-RO Carbon Filter

Removes chlorine and harmful chemical substances such as pesticides. Also eliminates bad odor and impurities, including complex compounds often present in water.

Stage 3: Mesh Filter

Removes ultra-fine particles and dirt that may still be present in the water.

Stage 4: RO Membrane

Removes chlorine, bacteria, harmful chemicals, and dissolved solids such as TDS (Total Dissolved Solids), iron, aluminum, and heavy metals.

Stage 5: Post Carbon Filter

Acts as a polisher and improves the taste of purified water.

Stage 6: Micro Filtration Filter

Post-RO water goes through a microfiltration membrane that removes bacteria and viruses, ensuring even safer drinking water.

Yes. The RO filter technology used in Pureit Marina is capable of removing arsenic, fluoride, and nitrate effectively.

Pureit Wave can purify up to 20 liters of water per hour under Pureit test conditions. The purification speed depends on filter condition, inlet water pressure, TDS level, and the presence of various impurities in the water.

To ensure your Pureit filter functions effectively, it’s important to monitor and replace the Germkill Kit (GKK) and Sediment Filter (SF) as needed. You can contact customer care, and a representative will visit your home to replace them.

GKK should be replaced after 6,000 liters of purified water usage under Pureit test conditions and sediment filter will be included in GKK. However, based on input water quality, the Litrage amount might vary from the standard values. If you notice a decrease in water flow or bad taste, earlier replacement is advised.

No. You should only drain the first full chamber of water during installation or the first time the Germkill Kit (GKK) is replaced. This is necessary to ensure quality.

If the purifier is left open, dust and dirt from the environment may enter and accumulate in the chamber. It’s best to keep the purifier closed at all times and store it in a clean area.

If you experience issues like unusual taste or odor, first drain one full bucket of water from the chamber. If the issue persists, check the purifier for leaks or consider getting it cleaned by a technician.

The purifier can store up to 6 liters of water. If the water is not used within a day, it is recommended to discard it, refill the tank, and then use it to ensure freshness and safety.

For any after-sales support related to your Pureit device, please call our Careline at 16627, available every day from 8:00 AM to 12:00 AM. Service time may vary based on the availability of spare parts and Germkill Kits (GKK).

Pureit Marvella Slim purifies water through a modern, 7-stage purification process that ensures water is Safer than boiled Water. It features an advanced Total Dissolved Solids (TDS) control technology to guarantee safe drinking water. 

Stage 1: Pre-Sediment Filter (SF)

Removes larger particles and impurities, which increases the durability and efficiency of the following filter stages.

Stage 2: Membrane Protector

Removes chlorine, harmful pesticides, bad taste, and odor-causing organic compounds, increasing the life of the RO membrane

Stage 3: Mini Filter

Filters water further to ensure the removal of finer particulate impurities.

Stage 4: RO Membrane

Removes arsenic, mercury, lead, nitrates, heavy metals, germs, bacteria, viruses, fluoride, etc., and completes the water purification process.

Stage 5: UV Chamber

Destroys any remaining germs in the water using ultraviolet rays.

Stage 6: Post RO Carbon Filter

Acts as a polisher and enhances the taste of purified water.

Stage 7: Micro Filtration (MF) Membrane

Additional stage of purification to further purify water.

Pureit has a Storage Tank capacity of up to 8 Litres. The storage tank is fully automatic and well shielded, and as and when you take water out of the tank, the purification process starts automatically again and refills the Storage Tank.

Pureit can purify water upto 20 litres/hour under Pureit test conditions. However, the time taken to purify depends on the life of the filters, the input water pressure, TDS and other impurities present in the water.

Like other ions, the RO technology can also remove fluoride and nitrates.

For any after-sales support related to your Pureit device, please call our Careline at 16627, available every day from 8:00 AM to 12:00 AM. Service time may vary based on the availability of spare parts and Germkill Kits (GKK).

Pureit Classic can store 9 litres of purified water at a time, but the total volume of the Pureit Classic device is 23 litres.

Every time you fill the top chamber of a 'Pureit Classic' water purifier with water, all of it will get purified and will collect in the transparent chamber within a few hours. So you can keep filling the top chamber as often as you need. However, you must ensure that there is one inch of empty space left in the transparent chamber, and that you don’t then pour any more water into the top chamber. If you don’t do this, or if you forget to withdraw water from the transparent chamber, the system has been designed to overflow from the side. You may repeat as many cycles a day as you require.

The average flow-rate of the Pureit water purifier will depend upon the quality of the water that is put into the Pureit system, and may also vary with the life of the Pureit Germkill Processor. The flow-rate through the system will typically be in the region of 30–150 ml/min. This means that 9 litres of water would get purified in 1–5 hours, depending on the quality of input water. Please note that the flow rate will be much higher than that in the beginning of the Pureit Germkill Kit™ life. Whenever you feel that the flow from your Pureit water purification system has become unsatisfactorily low, you can wash the Activated Carbon Filter. Cleaning will remove accumulated dirt on the Activated Carbon Filter and will improve the water flow. Please follow Activated Carbon Filter cleaning instructions mentioned in Troubleshooting. It must be remembered that the first time you use the system, and anytime else when you empty the Cleansing – Collection chamber (such as after prolonged nonuse) no water will come out into the transparent section for a few hours. This is because the Cleansing – Collection chamber has to get re-filled with water.

Input water may contain many materials which affect the taste of water. Of these, Pureit removes materials like oil, sand, soil, clay, dirt, decayed animal and plant waste, and harmful pesticide impurities and is therefore likely to improve the taste of water. However, Pureit Classic does not remove some dissolved salts that may contribute to taste like sodium chloride salt, calcium and magnesium. In fact, it retains some ‘good’ dissolved salts present in drinking water. This may affect the taste of water.

Yes, the water will be free of harmful germs, but there may not always be an improvement in taste. However, by pouring brackish/sea water into the Pureit, there may be a risk of choking the system, and the ‘Auto Shut-off’ mechanism may malfunction.

No, this is not a problem. The final stage of Pureit Classic i.e. Polisher removes all the residual chlorine from the water, giving you absolutely safe, odor-free, great tasting and safe drinking water from the transparent chamber.

The first batch of water that gets purified in your new Pureit, or from a new ‘Germkill Kit™’, should be drained away when it collects in the transparent chamber. This batch of water may have a distinctive taste and needs to be drained out by opening the tap. It should be noted that even though the first batch of water may have a distinctive taste, it is completely safe, even if accidentally ingested. Once you drain away the first batch, you will get pure and great tasting water in subsequent batches.

The first batch of water that gets purified in your new Pureit, or from a new Germkill Kit, should be drained away when it collects in the transparent chamber. This batch of water may contain some black particles that have got loosened from inside the Polisher during transit. Black particles may also appear as a result of shifting or tilting Pureit or when you are using Pureit after several days. It should be noted that these black particles are a part of the Polisher’s specially designed porous filter derived from natural coconut shell and are therefore completely safe, even if accidentally swallowed. To remove these black particles, pour the collected water back into the top chamber and rinse the transparent chamber with Pureit water to remove any particles that may be stuck to the sides.

In some cases, as with colloidal clay suspensions and with soluble salts of calcium, magnesium, iron etc., the turbidity and colour may not be completely removed. In these cases please ensure that there are no deposits or scales in the Transparent Chamber – if these are there then clean them by using a disinfectant. Rinse the Transparent Chamber thoroughly with Pureit water. Once this is done, the output water will be microbiologically completely protected from harmful germs even if some colour persists.

We advise that you let the water stand in another container for some time until most of the dirt settles down. Now pour the water into Pureit. This will ensure that the system does not get prematurely choked.

The Pureit system, and the Germkill Kit™ has been made from good quality, food-safe, non-toxic engineering plastics. These plastics will also not impart a smell to the water. Similar plastics are used in all high-quality refrigerators.

The tap will come in repeated contact with hands, bottles and glasses. You need to ensure that as a result of these contacts the tap does not get contaminated with germs. In case you do find that the mouth of the tap has become dirty, clean and disinfect it with a dilute disinfectant such as bleach / hypochlorite (50 ppm available chlorine) solution then discard the first 2 litres of Pureit water that flows through the tap.

Yes, this can be done. If you are shifting the purifier from one location inside the home to another, we would advise that you first remove the water from the top chamber, the batching chamber, the transparent chamber, and the Cleansing Collection chamber, only then shift the purifier. If you have to shift the purifier to a location outside your home you also need to ensure that the purifier is properly packed for transportation. Do not use the purifier for getting drinking water while it is being transported. Also, if the device is out of use for more than 3 days, then on starting to use again, throw one cycle of water from the transparent chamber.

If some part of Pureit breaks accidentally, please call Pureit helpline-16627. We will arrange to send you a replacement part. You will however have to pay for the replacement part.

Yes, we can arrange to do that for you if you wish. Please call us on our Pureit Helpline No. 16627, and we will arrange to get a water test done for you. This service will carry a fee.

For any after-sales support related to your Pureit device, please call our Careline at 16627, available every day from 8:00 AM to 12:00 AM. Service time may vary based on the availability of spare parts and Germkill Kits (GKK).