Pureit Wave RO+MF
Pureit Wave RO+MF
Pureit's latest water purifier with high-speed purification at the best price ensures 100% RO purified water by removing Viruses, Bacteria, Chemicals & Heavy Metals like Iron.
In Stock
৳ 16,000
৳ 16,500*
*MRP (inclusive of all taxes) for 1 unit.
*Free home delivery and installation.
Pureit's latest water purifier with high-speed purification at the best price ensures 100% RO purified water by removing Viruses, Bacteria, Chemicals & Heavy Metals like Iron.

6 -Stage Purification

Large 6 Liter Water Storage

Advanced Alert + Auto Shut-Off System

100% RO+MF Purified Water
Features
Pureit Wave RO+MF

Pureit Wave RO+MF
New Pureit Wave RO+MF Water Purifier with 6 Litre Storage.
Advance 6 Stage Purification

Advance 6 Stage Purification
To ensure you get safe drinking water with multistage protection.
Large 6 Litres Storage

Large 6 Litres Storage
6 litres storage Ensures purified water all day.
High Speed 20L/Hour Purification

High Speed 20L/Hour Purification
Best-in-class purification that gives you 20 litres of safe RO water in less than 1 hour.
Adds Essential Minerals

Adds Essential Minerals
Get 100% RO water enriched with essential minerals like Calcium & Magnesium. No bypass.
Safety From Water Brone Disease

Safety From Water Brone Disease
Kills up to 99.9% bacteria, virus & cyst.
Specifications
Purified Water Flow Rate (Average)* | Approximately 20 Litre per hour |
Purification Capacity | Germkill Kit™ is designed to give approximately 6000L^ of purified water depending on input water pressure, TDS and water temperature. |
Membrane Type | Thin film composite spiral wound |
Material of Construction | Food safe, non-toxic, engineering-grade plastics |
Pump Type | Diaphragm pump 24V DC |
Purification Capacity (CSF Germkill Kit ™) | Removes dissolved salts, hardness, pesticides and heavy metals like lead and mercury. It also removes microbial contaminants like bacteria, virus, protozoa and cysts |
GermKill Performance Standard | Meets stringent international criteria for microbiologically safe drinking water, such as Environmental Protection Agency (EPA), USA |
% Recovery * | Typically 45% |
TDS Reduction** | 90% (Min) |
Power Rating | 36 Watts |
Pressure Rating | 10–30 PSI |
Operating Voltage | 100–240 Va.c 50/60 Hz |
Length of Power Adapter | 1.5 metres |
Total Dissolved Solids | Upto 2000 ppm |
Total Hardness | 500 mg/lit (max) |
Iron in Input Water | 0.3 mg/lit (max) |
Turbidity of Input Water | 1 NTU (Max) |
Germkill Kit
Pureit Wave RO+MF GKK
৳ 4,000*
Specifications for Germkill Kit
Purification Capacity | Germkill Kit™ is designed to give approximately 6000L^ of purified water depending on input water pressure, TDS and water temperature. |
Material of Construction | Food safe, non-toxic, engineering-grade plastics |
GermKill Performance Standard | Meets stringent international criteria for microbiologically safe drinking water, such as Environmental Protection Agency (EPA), USA |
Purification Capacity (CSF Germkill Kit ™) | Removes dissolved salts, hardness, pesticides and heavy metals like lead and mercury. It also removes microbial contaminants like bacteria, virus, protozoa and cysts |
Product Manual
FAQs
It uses 6 stages of purification:
Stage 1: i-Sediment Filter
Removes small and ultra-fine particles or sediments from the water and extends the filter’s lifespan.
Stage 2: Pre-RO Carbon Filter
Removes chlorine and harmful chemical substances such as pesticides. Also eliminates bad odor and impurities, including complex compounds often present in water.
Stage 3: Mesh Filter
Removes ultra-fine particles and dirt that may still be present in the water.
Stage 4: RO Membrane
Removes chlorine, bacteria, harmful chemicals, and dissolved solids such as TDS (Total Dissolved Solids), iron, aluminum, and heavy metals.
Stage 5: Post Carbon Filter
Acts as a polisher and improves the taste of purified water.
Stage 6: Micro Filtration Filter
Post-RO water goes through a microfiltration membrane that removes bacteria and viruses, ensuring even safer drinking water.
Yes. The RO filter technology used in Pureit Marina is capable of removing arsenic, fluoride, and nitrate effectively.
Pureit Wave can purify up to 20 liters of water per hour under Pureit test conditions. The purification speed depends on filter condition, inlet water pressure, TDS level, and the presence of various impurities in the water.
To ensure your Pureit filter functions effectively, it’s important to monitor and replace the Germkill Kit (GKK) and Sediment Filter (SF) as needed. You can contact customer care, and a representative will visit your home to replace them.
GKK should be replaced after 6,000 liters of purified water usage under Pureit test conditions and sediment filter will be included in GKK. However, based on input water quality, the Litrage amount might vary from the standard values. If you notice a decrease in water flow or bad taste, earlier replacement is advised.
No. You should only drain the first full chamber of water during installation or the first time the Germkill Kit (GKK) is replaced. This is necessary to ensure quality.
If the purifier is left open, dust and dirt from the environment may enter and accumulate in the chamber. It’s best to keep the purifier closed at all times and store it in a clean area.
If you experience issues like unusual taste or odor, first drain one full bucket of water from the chamber. If the issue persists, check the purifier for leaks or consider getting it cleaned by a technician.
The purifier can store up to 6 liters of water. If the water is not used within a day, it is recommended to discard it, refill the tank, and then use it to ensure freshness and safety.
For any after-sales support related to your Pureit device, please call our Careline at 16627, available every day from 8:00 AM to 12:00 AM. Service time may vary based on the availability of spare parts and Germkill Kits (GKK).
Disclaimer
~ “Purity” here refers to the TDS range of water
^ “Quality” here refers to the TDS range of water
^^ Depend on your water quality
^^^ You can see the quality of water through the purity indicator only when water is being purified or the purifier is in use
# Advance Alert SystemTM will alert you 15 days before every 180 days (approximately) or 15 hours before completion of every 200 hours of pump running time, whichever is earlier. The purifier will communicate the alert only if the purifier is in switched-on condition during the scheduled alert time. Post the completion of the scheduled alert time, Auto Shut-OffTM of water will be activated automatically for GKK only, even if the purifier is in switched-off condition.
* Permeate flow rate and recovery are based on standard test conditions and may vary depending on input water quality, TDS, pressure and life of Filter elements
** 10 litres of storage only with running water. Or else 9.2 litres of water dispensing.
*** Input water quality and TDS content are important determinants of output water quality.
**** If input pressure exceeds 30 PSI, please install a company provided pressure reducing valve at an additional cost. If the pressure is lesser than 10 PSI, then you need to buy 'Pressure enhancing pump at an additional cost. Device should not be installed in a house where input pressure is greater than 60 psi.
##Technical specifications are subject to change or improvement without prior notice
### In case the TDS is > 1000 ppm, a company provided anti-scalant is recommended to be installed, this has to be purchased at extra cost.
#### If the iron content in the input water is more, it is recommended to install a company provided iron filter.
Physical product may vary from the image on the website