Pureit Ultima RO+UV+MF

Pureit Ultima RO+UV+MF

Pureit's Best Water Purifier with a digital display that ensures 100% RO purified water by removing Viruses, Bacteria, Chemicals & Heavy Metals like Iron.

৳ 31,000

৳ 32,500*

*MRP (inclusive of all taxes) for 1 unit.

*Free home delivery and installation.

7 Stage Purification
7 Stage Purification
10 litres capacity
10 litres capacity
Auto Shut Off
Auto Shut Off
100% RO+UV Purified Water​
100% RO+UV Purified Water​
Buy Now

Features

Pureit Ultima RO+UV+MF

1744652541-2515732.png

Pureit Ultima RO+UV+MF

Best Selling Pureit Ultima Reverse Osmosis Water Filter with 10 Litre Storage.

Advance 7 Stage Purification

1718041258-86647177.jpg

Advance 7 Stage Purification

To ensure you get safe drinking water with multistage protection.

Large 10 Litres Storage

1744652719-72056928.png

Large 10 Litres Storage

High storage capacity, so that you & your family never run out of fresh & safe RO water.

High Speed 28L/Hour Purification

1744652781-72721556.png

High Speed 28L/Hour Purification

Best-in-class purification that gives you 28 litres of safe RO water in less than 1 hour.

Adds Essential Minerals

1744652845-68388108.png

Adds Essential Minerals

Get 100% RO water enriched with essential minerals like Calcium & Magnesium. No bypass.

Safety From Water Brone Disease

1756041663-30485227.png

Safety From Water Brone Disease

Kills up to 99.9% bacteria, virus & cyst with highly effective UV lamp.

Specifications

Purified Water Flow Rate (Average)*

Approximately 12 -15 Litre per hour

Purification Capacity

Germkill Kit™ -1 is designed to give approximately 4000L^ of purified water and Germkill Kit™ -2 gives approximately 8000L^ of purified water respectively depending on input water pressure, TDS and water temperature

Membrane Type

Thin film composite spiral wound

Material of Construction

Food grade, non-toxic, engineering grade plastics

Pump Type

Diaphragm pump 24V DC

Purification Capacity (CSF Germkill Kit ™)

Removes dissolved salts, hardness, pesticides and heavy metals like lead and mercury. It also removes microbial contaminants like bacteria, virus, protozoa and cysts

Germkill Performance Standard

Meets stringent international criteria for microbiologically safe drinking water, such as Environmental Protection Agency (EPA), USA

% Recovery *

Typically 45%

TDS Reduction**

90% (Min)

Power Rating

60 Watts

Pressure Rating

10–30 PSI

Operating Voltage

100–240 Va.c 50/60 Hz (100–300 Va.c 50/60 Hz)

Length of Power Adapter

1.5 metres

Total Dissolved Solids

Upto 2000 mg/lit (max)

Total Hardness

500 mg/lit (max)

Iron in Input Water

0.3 mg/lit (max)

Turbidity of Input Water

1 NTU (Max)

Germkill Kit

In Stock

Pureit Ultima RO+UV GKK 1

৳ 2,500*

In Stock

Pureit Ultima RO+UV GKK 2

৳ 4,500*

Specifications for Germkill Kit

Purification Capacity

Germkill Kit™ -1 is designed to give approximately 4000L^ of purified water and Germkill Kit™ -2 gives approximately 8000L^ of purified water respectively depending on input water pressure, TDS and water temperature

Material of Construction

Food safe, non-toxic, engineering-grade plastics

Purification Capacity (CSF Germkill Kit ™)

Removes dissolved salts, hardness, pesticides and heavy metals like lead and mercury. It also removes microbial contaminants like bacteria, virus, protozoa and cysts

Germkill Performance Standard

Meets stringent international criteria for microbiologically safe drinking water, such as Environmental Protection Agency (EPA), USA

Product Manual

FAQs

Pureit Ultima RO+UV+MF purifies water through a modern, 7-stage purification process that ensures water is Safer than boiled Water. It features an advanced Total Dissolved Solids (TDS) control technology to guarantee safe drinking water. In the primary stages, the water passes through the Pre-Sediment Filter, Pre-RO Carbon Filter and Mesh Filter which removes coarse particulate impurities, dirt, chlorine, pesticides and other organic impurities. After which, the water flows through RO Membrane at high pressure where it removes TDS and heavy metals. The fifth stage is the high-intensity UV Chamber that inactivates harmful bacteria and viruses. After UV Chamber, the water passes through a TDS Modulator that adds natural minerals to the water, which then flows through a Post RO Carbon Filter that improves the taste and finally, the Micro-Filtration Membrane where water is purified third time!

Pureit Ultima RO+UV+MF has a storage tank capacity of 10 litres under Pureit test conditions with running input water in a power ON condition. With no continuous input water, the average dispense capacity is 9.2 litres. The process of filling the storage tank is fully automatic and when you take water out of the tank, the purification process automatically starts and refills the storage tank.

Pureit Ultima RO + UV + MF can purify water up to 28 litres per hour. However, the time taken to purify is influenced by the type of your water supply, the longevity of the device’s filters, the input water pressure, and other impurities present in the water. Pureit Ultima Mineral RO + UV + MF is also equipped with High-Water Saving feature that offers significant water saving of upto 45%.

You need to call the Pureit Helpline at 16627 and order the consumables. The Technician will visit your place and replace the consumable/Germkill Kit. There will be a delivery charge and you would need to buy the parts required.

You need to call the Pureit Helpline at 16627 and order the consumables. The Technician will visit your place and replace the consumable/Germkill Kit. There will be a delivery charge and you would need to buy the parts required.

If the input water has impurities normally not present in drinking water (high iron/ turbidity/ microbial contamination, etc.) or water is from an unknown source (river/lake/pond /borewell, etc.), then suitable pre-treatments may be required.

It is not recommended to open and service device by an individual. Call our Pureit Helpline at 16627 if you face any issue which requires servicing and opening the device.

There may be several reasons for this: While the Germkill Kits and the Pre-Sediment Filter have fixed replacement schedules, depending on your input water quality the Pre-Sediment Filter might need a replacement or cleaning even before the purifier gives you an alert. In such cases, please contact Pureit helpline on 16627 and get the Pre-Sediment Filter cleaned or replaced. The purifier will communicate the alert only if the purifier is in a switched on condition during the scheduled alert time. Post the completion of the scheduled alert time, Auto Shut off of water will be activated automatically for GKK, even if the purifier is in a switched off condition

While the Germkill Kits and the Pre-Sediment Filter have a fixed replacement schedule, you might be required to change the filters in the interim depending on the quality of your input water. Should the tap flow rate be very less or if it is taking too long for the tank to fill, then please contact the Pureit helpline at 16627 to change the membranes. These extra visits will be chargeable as per T&C.

No, the water from the first cycle should be discarded. The same process should be followed after every filter replacement.

You can use stored water for 2 days. If it is not used for more than 2 days we advice you to discard that water, follow guidelines mentioned in user manual for maintenance of purifier, refill and then consume.

For any after-sales support related to your Pureit device, please call our Careline at 16627, available every day from 8:00 AM to 12:00 AM. Service time may vary based on the availability of spare parts and Germkill Kits (GKK).

Disclaimer

~ “Purity” here refers to the TDS range of water

^ “Quality” here refers to the TDS range of water

^^ Depend on your water quality

^^^ You can see the quality of water through the purity indicator only when water is being purified or the purifier is in use

# Advance Alert System will alert you 15 days before every 180 days (approximately) or 15 hours before completion of every 200 hours of pump running time, whichever is earlier. The purifier will communicate the alert only if the purifier is in switched-on condition during the scheduled alert time. Post the completion of the scheduled alert time, Auto Shut-Off of water will be activated automatically for GKK only, even if the purifier is in switched-off condition.

* Permeate flow rate and recovery are based on standard test conditions and may vary depending on input water quality, TDS, pressure and life of Filter elements

** 10 litres of storage only with running water. Or else 9.2 litres of water dispensing.

*** Input water quality and TDS content are important determinants of output water quality.

**** If input pressure exceeds 30 PSI, please install a company provided pressure reducing valve at an additional cost. If the pressure is lesser than 10 PSI, then you need to buy a 'Pressure enhancing pump' at an additional cost. The Device should not be installed in a house where the input pressure is greater than 60 psi.

## Technical specifications are subject to change or improvement without prior notice

### In case the TDS is > 1000 ppm, a company provided anti-scalant is recommended to be installed, this has to be purchased at an extra cost.

#### If the iron content in the input water is more, it is recommended to install a company provided iron filter.

Physical product may vary from the image on the website